1. Properties
DEYI NO MORE NAILS GLUE is characterized with strong adhesion, high strength. It is flexible, not brittle, unsinkable, fillable, and paintable, weatherable, water proof. It is also non-toxic, low odor and eco-friendly, free of toluene and meets the standards of GB18583.
2. Applications
DEYI NO MORE NAILS GLUE is so high in viscosity that it can function as nails. Without drilling holes, it can bond timber, plasterboard, medium-density fiberboard, stone, cement, tile, metal, plastic, and rubber.
3. Directions
1.The surfaces to be bonded should be clean, free from dust, grease or oil. 2.Cut an opening in the mouth of the tube, matched with the attached plastic pipe. Then squeeze the adhesive out with a sealant Gun.
Method 1 (applicable for light objects and the bonding part bearing weak force): Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Push the part with adhesive toward the other and then remove it so that there is an opening between them for the solvent to volatilize. Wait for 2-5 minutes and then compress the two parts against each other.
Method 2 (applicable for heavy objects): Coat one part to be bonded with several "zigzag" patterns at the intervals of 40 cm. Clamp or screw the two parts together until the glue dries (in about 24 hours). Then remove the clamp or the screw. The bonded parts can be adjusted if necessary in 20 minutes. the initial curing time is 24 hours and the adhesive will work and reaches its best effects in 48hours.
4. Storage & Warnings
Storage:
- Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
- Store the adhesive at room temperature.
- Keep away from any source of ignition.
Warnings:
- The adhesive is irritable to skin and eyes.
- Keep out of reach of children.
- In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
5. Parameters
| Color | Viscosity
(CPS/25℃) | Mixing Ratio | Work Time(25℃/100g) | Cure Time
(25℃/100g) | Tensile Strength
(Mpa) | Heat Resistance
(℃) | Shelf Life
(25℃) |
| Porcelain White/Beige | Paste Colloid | -- | 20 Minutes | Touch dry:
24 hrs | 2.00 | -60 to +100 | 18 months |
| Full cure:
48 hrs |
